Elevate Pondgard Rubber Liner is a 1.02 mm thick EPDM membrane specifically designed for decorative pond applications.

Elevate Pondgard Rubber Liner is the material of choice for various lining applications:

• Artificial lakes
• Golf course water features
• Commercial decorative ponds
• Residential decorative ponds
• Reflection ponds
• Streams, waterfalls and fountains
• Swimming ponds
• Natural swimming pools
• Leisure park water features

Because of its specific formulation and production process, the Elevate Pondgard EPDM membrane is guaranteed to be compatible with aquatic life in accordance with testing reports published by the Water Research Centre in the UK.

We stock the following widths with a maximum of 30.5 metres:

• 3.05m
• 4.88m
• 6.1m
• 9.15m

We can also order in the following widths with a maximum of 30.5 metres:

• 7.62m
• 12.2m
• 15.25

In order to determine the size of liner you require follow the formula below.

Width required = Maximum width of pond + (2 x maximum depth) + (2 x overhang required)

Length required = Maximum length of pond + (2 x maximum depth) + (2 x overhang required)

The overhang of liner that you will require will depend on how you are decorating the edge of you pond. You will need less overhang for a timber or brick edge than you will for rocks. Liner should go under the rocks and come up the back of them so that the water level of your pond can be raised to half way up the height of the rock. This will hide the liner and give a more natural appearance.

The 7.62m, 12.2m and 15.25m widths of Pondgard will take approximately 1 week to be in store.

Prices given are per lineal metre ie. 2 metres of 3.05m Pondgard = 1 piece of Pondgard at 2m x 3.05m = $152